ISS 1, SECTION S 12-750-100
co
LINE
\
""
"" ""' """"
INTO LINE JACK IN
''TELEHELPER"
SPEAKERPHONE
Fig. 6-Recommended Installation for Single Line Modular Desk Type Telephone Set
(1) Place template (Fig. 8) over 630A4 connecting
block. Level template and mark the two
X
loca
tions (associated with the type of set to be in
stalled) through template onto wall. Remove
template.
(2) Remove battery and cord connections cover
from speakerphone.
(3) Plug 730B phonemount cord into speaker
phone modular jack labeled PHONE and dress
through cord slot (Fig. 10).
(4) Plug wall mount adapter cord into speaker
phone modular jack labeled LINE and dress
cord through cord slot (Fig. 10).
(5) Connect and place battery in battery com part-
ment. Replace battery and cord connections
cover.
(6) Place wall mount adapter on rear of speaker-
phone dressing the adapter lead and the 730B
phonemount lead between speakerphone and
adapter mount (Fig. 11 and 12). Screw adapter
mount onto speakerphone making sure cutouts in
adapter mount align with battery cover (Fig. 13).
(7) Place speakerphone with mount over 630A4 in
which central office line is terminated and
press down.
(8) Mount the 730B phonemount (Fig. 10) (at
tached cord exiting bottom of plate) to the wall
using template marks, and center top and bottom
mounting holes (Fig. 12).
Page 7
BSP
512-750-100-i01-i01_198-07.jpg Scanned by Frank Harre!!, {Cowboy Frank) Castle Rock, Colorado Feb 23,2012 22:57:52
