SECTION 512-750-100
MICROPHONE
PORT
COVER
HOLD-DOWN
SCREWS
BATTERY
COMPARTMENT
�J�
D
SLOTS
BATTERY AND CORD CONNECTIONS COVER
9
VOLT ALKALINE BATTERY
Fig. 5-Bottom View of The TELEHELPER Speakerphone With Battery and Cord Con
nections Cover Removed
utilizing the D-180882 Kit of Parts unplug the
D8AA mounting cord from the 304A adapter.
Do not unplug mounting cord from speak
erphone as this will disconnect the asso
ciated telephone set from the incoming
line.
C.
Wall Installation Using D-181 062 Kit of Parts (Fig. 2)
3.08
The speakerphone can be wall mounted in con
junction with the residence wall telephones
shown on template (Fig. 8).
Note:
Select a location for mounting the
Page 6
speakerphone which will provide a hard surface
beneath the speakerphone with no obstruction
to the microphone port (Fig. 4)_ Also avoid lo
cating in noisy locations and near sources of
heat and dust.
3.09
To mount the speakerphone with a new or ex
isting wall telephone proceed as follows.
Note:
The wall telephone must be modular
with an associated 630A4 connecting block in
stalled. If a modular wall telephone is already
installed, remove from 630A4 connecting block.
BSP
512-750-100-i01-i01_198-06.jpg Scanned by Frank Harrell, {Cowboy Frank) Ca!.Ue Rock, Colorado Feb 23,2012 22:57:34
