SECTION 502-303-1 01
NOTE:
THE SCREWS USED FOR SECURING THE
TERMINAL BOARD SHOULD NOT BE USED
FOR STORING SPARE LEADS.
LINE SWITCH
ARM
PIA
RIN
SCREWS
P-25E803
NUMBER CARD
RETAINER
Fig. 4-lnterior of AD1 Telephone Bose
•
Space provided on bases for number card
and associated number card retainer (Fig. 6)
•
ACl telephone base provides waiting position
for handset without going to on-hook position
(Fig. 7)
2.09
The hand telephone set with base can be
used on CO or
PBX
lines or can be modified
for use with lAl, 1A2, or 6A key telephone systems.
3.
INSTALLATION
3.01
When planning the installation of a hand
telephone set together with its companion
base, consider the following:
•
Safety for yourself, customer, and maintenance
personnel
Page 4
•
Location-desk, table, wall, etc.
•
Availability of power outlet for hand telephone
set dial light transformer
•
Space requirements
•
General appearance of installation
3.02
The plastic housings of the ACl and ADl
bases are secured by captive housing screws
located behind the number card and number card
retainer. To remove the housing from either base
assembly use a KS-16750 type releaser or equivalent
to remove the number card retainer (Fig. 6).
Be
careful not to insert the tip of the releaser too
deep or mar the base housing.
Loosen the two
captive screws, which are now exposed, and lift
the housing off.
BSP 502
-
30
3
-
101
-
i0
3
_
1
972
·
0
9
-
04
.
jp
g
Scanned by Frank Harrell, !Cowboy Frank) Castle Rock, Colorado Jan 31,2012 21:48:47
