Determining the Operating Status
Status lights
Stinger® MS+ Getting Started Guide
3-3
After startup, all six TRUNK STATUS lights and the MINOR status light turn OFF.
Then after the system comes up, each light monitors a particular status as described
in the next section.
Status lights
The status lights on the modules in the Stinger unit indicate the operating status of
each module.
Control module status lights
Figure 3-2 shows the locations of the control module status lights.
Figure 3-2. Control module status lights
All control module status lights except the MASTER light momentarily turn ON just
after startup, and all six TRUNK STATUS lights turn OFF. After the system starts up,
each light monitors a state as described in Table 3-1.
FDX
ACT
10
100
TRUNK STATUS lights
Ethernet status lights
Alarm status lights
MASTER status light
