BELL+HOWELL BHDC1A, Руководство пользователя

Страница: 15 / 20

3. Using Your Doorbell
3.2 Connecting the Chime to the Doorbell
You can hear doorbell ring alerts from anywhere in your home through the chime
accessory without the need for a smart device. Follow the steps below to connect
the chime to your doorbell:
1. Remove the rear cover of the chime and open the battery door. Install
the included batteries, make sure that they are installed in the correct
orientation, then replace the battery door.
2. Press and hold the volume button until the LED indicator on the front of
the chime turns on.
3. Press the button on the doorbell to complete the connection to the
chime.
4. Once connected, the chime will sound whenever the doorbell button is
pressed.
5. To change the volume level on the chime, press the volume button to
cycle through the volume levels.
6. To change the ring tone, press the up or down buttons on the side of the
chime to select your desired ring tone.
7. The chime can now be placed in a location of your choosing in your home.
It is for indoor use only and should not be placed outdoors.
8. To connect multiple chime units to the same doorbell, perform the steps
above for each individual chime.
Note: Multiple chimes can be connected to the same doorbell. A chime
can only be connected to one doorbell at a time. The chime must be
unpaired from the doorbell before pairing to a new doorbell.
To unpair the chime from the doorbell, press and hold the volume button for
10 seconds. This will disconnect the chime from the doorbell. To reconnect
the chime to the doorbell, follow the steps above.