BELL HELICOPTER 205A-1, Руководство по обслуживанию

Страница: 49 / 160

BHT-205A1-MM-1
5-00-00
29 NOV 2013 Rev. 8 Page 27 Export Classification C, ECCN 9E991
7. Remove battery and perform reconditioning cycle in
accordance with battery instruction manual. Install serviceable
battery.
FLIGHT CONTROLS
1. Inspect all control rods for clearances, security, and
general condition.
Chapter 27 2. Inspect tail rotor and synchronized elevator control tubes
for wear.
3. Check all controls for freedom of motion.
4. Collective stick for proper minimum friction. Check shoes
and liners for excessive wear.
5. Inspect all anti-torque control tubes in tailboom for chafing
and wear.
Chapter 27 ELEVATOR
— Detailed Visual Inspection
1. Elevators for security, cracks, damage, loose or missing
rivets, and corrosion.
2. Check elevator attachment lugs at each end of elevator
horn for cracks and security of attachment. Check elevator horn
to elevator spar attaching bolts and surrounding joints for cracks
and security of attachment.
Every third 100 hour inspection (300 hours) or 12 months:
1. Check left and right elevator assemblies for excessive axial
and radial play using a dial indicator mounted on the tailboom,
with stylus touching inboard edge of elevator near attachment
bolt for axial measurement, and touching upper surface near
attachment bolt for radial measurement. Applying light force to
move elevator in required direction, check that radial movement
does not exceed 0.010 inch (0.254 mm), and that axial
movement is within 0.005 to 0.030 inch (0.127 to 0.762 mm).
Adjust shims as required.
SCHEDULED INSPECTIONS
5-9. 100 HOUR INSPECTION (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER