Bell and Gossett ecocirc 19-16, Инструкция по эксплуатации

Страница: 7 / 32

Qualified personnel
WARNING:
This product is intended to be operated by qualified personnel
only.
1.3 User safety
General safety rules
These safety rules apply:
• Always keep the work area clean.
• Pay attention to the risks presented by gas and vapors in the work area.
• Avoid all electrical dangers. Pay attention to the risks of electric shock or arc
flash hazards.
• Always bear in mind the risk of drowning, electrical accidents, and burn
injuries.
Safety equipment
Use safety equipment according to the company regulations. Use this safety
equipment within the work area:
• Hard hat
• Safety goggles, preferably with side shields
• Protective shoes
• Protective gloves
• Gas mask
• Hearing protection
• First-aid kit
• Safety devices
NOTICE:
Never operate a unit unless safety devices are installed. Also
see specific information about safety devices in other
chapters of this manual.
Electrical connections
Electrical connections must be made by certified electricians in compliance with
all international, national, state, and local regulations. For more information
about requirements, see sections dealing specifically with electrical
connections.
Precautions before work
Observe these safety precautions before you work with the product or are in
connection with the product:
• Provide a suitable barrier around the work area, for example, a guard rail.
• Make sure that all safety guards are in place and secure.
• Make sure that you have a clear path of retreat.
• Make sure that the product cannot roll or fall over and injure people or
damage property.
1 Introduction and Safety
ecocirc ® 19-16 INSTRUCTION MANUAL 5