78
Wireless G Router
sections
table of contents
1
2
3
4
5
6
8
9
10
7
ManUally ConfIGURInG neTWoRK seTTInGs
Manually Configuring network adapters in Mac os up to v9�x
In order for your computer to properly communicate with your Router, you will need to change your Mac computer’s TCP/IP settings to DHCP�
(1)
(2)
3�
Next to “Configure”
(2)
,
if “Manually” is selected,
your Router will need to
be set up for a static IP
connection type� Write the
address information in the
table below� You will need
to enter this information into
the Router�
4�
If not already set, at “Configure:”, choose “Using DHCP Server”�
This will tell the computer to obtain an IP address from the Router�
5�
Close the window� If you
made any changes, the
following window will
appear� Click “Save”�
Restart the computer� When the computer restarts, your network
settings are now configured for use with the Router�
1�
Pull down the Apple menu� Select “Control Panels” and
select “TCP/IP”�
2�
You will see the TCP/IP control panel� Select “Ethernet Built-In” or
“Ethernet” in the “Connect via:” drop-down menu
(1)
�
