Belkin VISION N1, Руководство пользователя

Страница: 42 / 684

40
Setting your Internet Service Provider (ISP) Connection
Type to Point-to-Point Tunneling Protocol (PPTP)
[European countries only] Some ISPs require a connection using PPTP
protocol, a type of connection most common in European countries. This
sets up a direct connection to the ISP’s system. Type in the information
provided by your ISP in the space provided. When you have finished, click
“Apply Changes” (9). After you apply the changes, the Internet Status
indicator will read “connection OK” if your N1 Vision is set up properly.
1. PPTP Account
– Provided by your ISP. Enter
your PPTP account name here.
2. PPTP Password – Type in your password and retype
it into the “Retype Password” box to confirm it.
3. Host Name – Provided by your ISP. Enter your host name here.
4. Service IP Address
– Provided by your ISP.
Enter your service IP address here.
5. My IP Address – Provided by your ISP. Enter the IP address here.
(1)
(2)
(4)
(5)
(7)
(3)
(6)
(8)
(9)
Alternate Setup Method