2
Setting Up Your SnapNType
Installing the SnapNType Software
Before installing the SnapNType software, please make
sure that:
1) You have disabled all other keyboard software installed in
your Handspring Visor handheld
2) You have performed a HotSync
®
function to backup all data.
3) Your Visor handheld has at least 10KB of free memory.
Follow these instructions to install SnapNType software on
your Visor handheld
1) Insert the SnapNType floppy disk into your computer’s
floppy drive.
2) Open the “My Computer” icon on the Windows
®
desktop
and double-click the “3.5" Floppy” icon. Then double-click
on the “SnapNType.prc” file to run the installation program.
3) Click once on the “SnapNType.prc” driver.
4) Click “OK” and then “Done”.
5) Perform a HotSync function to transfer the SnapNType
software onto your Visor handheld.
P73992-F8R0500-man.QXD 5/23/02 1:33 PM Page 2
