Do I need to disable the SnapNType driver before
performing HotSync functions?
If you are using a USB cradle, there is no need to disable the
SnapNType driver before performing HotSync functions.
However, if you use a serial cradle, because both the
SnapNType keyboard and your cradle used the same serial port,
you will need to disable the SnapNType driver before
performing a HotSync function.
Do I need to disable the SnapNType driver every time I
remove the device?
No, you can leave the SnapNType driver enabled all the time.
The only time you may want to disable the SnapNType driver is
when you need to use the serial port for another application,
such as beaming data or performing HotSync functions.
While the SnapNType driver is connected, can I beam
information to other PDAs?
No. You have to disable the SnapNType driver before
performing the beam action. However, you will be able to
receive beamed information while the SnapNType driver
is enabled.
12
Frequently Asked Questions (FAQs)
P73992-F8R0500-man.QXD 5/23/02 1:33 PM Page 12
