Hookup and Installation
Pur
eA
V P
o
w
er C
ons
ole
12
Step 5
Connect Digital Components to Digital Filter 1 and Digital Filter 2
(Bank 01 and Bank 02)
The PureAV Power Console PF60 contains two isolated digital filters that
are optimized to clean and condition the power to all of your digital
components. The digital filters also filter out noise created by digital
components such as DVD players and isolate your digital components from
connected video, audio, and high-current audio components.
A.
Attach PureAV power cord labels to each component’s power cord
before you plug the cord into the corresponding outlet on the Power
Console.
B. Cable/Satellite –
Connect your cable or satellite receiver power cord to
the outlet labeled “Cable/SAT”.
C. HDTV –
Connect your HDTV power cord to the outlet labeled “HDTV”.
D. Digital Video Recorder –
Connect your digital video recorder power
cord to the outlet labeled “DVR”.
E. DVD –
Connect your DVD power cord to the outlet labeled “DVD”.
Note:
You can connect any type of digital component into any of the digital
filter outlets. You are not limited to the components listed above.
