®
Self Help Guide
TSG-UK-1-001 | www.belkin.com
| Page 1 of 1
®
Self Help Guide
TSG-UK-2-005 | www.belkin.com
| Page 3 of 4
Text
Step 4
Plug the supplied Firmware Update Cable in to the (DB25) Parallel Port of a stand-alone
Computer (i.e. one that is not currently connected to and controlled by the KVM) and
connect the other end of the Cable into the (RJ45) Firmware Upgrade Port of the KVM.
Step 5
Now that everything is setup the KVM can be flash upgraded. Double click the Icon of
the Firmware Update File that you downloaded.
Once open, click on the
button in the KVM Firmware Update Window.
Should you receive the following Error Message then it means that the data cannot be
sent to the KVM in order to Flash Update it.
To resolve this click ‘OK’ and ‘OK’ again. Unplug Power from the KVM, then unplug the
Flash Update Cable. Wait 10 seconds. Now plug the Flash Update Cable in first,
followed by the Power Cable (or KVM Cable Kit). Repeat Step 4.
