OmniGuard
TM
UPS Power Management Software
4
-Pentium Processor
- 64 MB RAM
- 10 GB Hard Disk
2.
OmniGuard
T M
software requires one dedicated RS-232 serial port on your
server, for communication with the UPS.
2.2 Installing the UPS
Please refer to the Belkin OmniGuard
T M
Rackmount UPS user manual.
2.2.1 Computer interface connection
Connect the interface cable to a 9-pin computer interface port on the rear side of the UPS.
Connect the other end of the cable to the server that will be monitoring/controlling the
UPS.
CAUTION!
Connect the interface cable from the server to
the 9-pin communication port on the rear panel of the UPS
first, before set up the software.
CAUTION!
It is an option for the installation of software,
UPS works fine without the installation of the software.
Содержание OmniGuard
