Using the TuneBase FM
Using the TuneBase FM
| 08
Manually Selecting an FM Frequency
If you want to use a specific frequency, you can manually select it on your TuneBase FM.
1.
Tune your stereo to a frequency with a weak signal. If possible, try to find a frequency that
is not broadcasting a radio station.
2.
Press the
+
or
—
button on your TuneBase FM to select the same frequency. Pressing
and holding either button will provide faster tuning.
Storing a Preset Frequency
When you find a clear FM frequency, you can store it for later use. You can store two radio
frequencies using the 1 and 2 preset buttons.
1.
If you are not currently on the frequency you want to store, use the
+
or
–
buttons to
select the frequency.
2.
Press and hold the 1 or 2 preset button for two seconds. You will hear a beep when the
new frequency is programmed.
Selecting a Preset Frequency
Press the 1 or 2 preset button. Your TuneBase FM will change to the preset frequency.
Using the Audio-Out Jack and a Cassette Adapter
Your TuneBase FM is equipped with a 3.5mm audio-out jack. If you cannot find a clear FM
frequency, you can connect the 3.5mm audio-out jack on your TuneBase FM directly to
your stereo (if line-in is available) or to a cassette adapter.
Note:
When making this type of
connection, TuneBase FM and your car stereo should be turned off to eliminate possible
damage caused by Electrostatic discharge (ESD).