5
Setting Up Your SnapNType Keyboard (continued)
Charging your iPAQ with the SnapNType
The SnapNType PDA Keyboard includes a DC receptacle at the
bottom of the keyboard. To charge your iPAQ, just insert the AC
adapter plug into the DC power receptacle of the SnapNType.
(Fig. 5)
Removing the SnapNType Keyboard Software
Follow these instructions if you want to remove the SnapNType
software from your iPAQ Pocket PC:
1) Quit all programs and perform a soft reset.
2) Tap “Start” then select “Settings”.
3) Tap on the “System” tab and then select “Remove Programs”.
4) The list of installed programs will pop up in the “Program in
Storage Memory” list.
5) Tap “iPAQ SnapNType”, then tap “Remove”.
6) Tap “Yes” to confirm removal of SnapNType software.
Note: You need to reinstall the SnapNType software before
you can use the SnapNType keyboard again.
Fig. 5
P74052-F8Q1503-MAN.QXD 9/13/02 2:00 PM Page 5
