Configuring the SnapNType Software
To access the SnapNType application (Fig. 11), tap “Start”
and then “SnapNType”
on your iPAQ.
Fig. 11: SnapNType Configuration Screen
Enable
—this will allow the SnapNType to accept key input.
Disable
— this will turn off the SnapNType driver.
Repeat rate
— this will determine the repeat frequency of a
key when you hold it down continuously.
Delay Until Repeat
— this will determine the delay from your
holding down a key to the key repeating.
Click Sound
— you can enable or disable key click. For this
function to work properly, you need to first turn on Hardware
buttons sound in your iPAQ: tap “Start”, then “Settings”.
14
P74052-F8Q1503-MAN.QXD 9/13/02 2:00 PM Page 14