Belkin F6D3000-HP Скачать руководство пользователя

Страница: 43 / 46

Information

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to operate

this equipment.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated

with minimum distance 20cm between the radiator & your body.

If this device is going to be operated in 5.15 ~ 5.25GHz frequency range, then

it is restricted in indoor environment only.

This transmitter must not be co-located or operating in conjunction with any

other antenna or transmitter.

Belkin declares that F6D3000-HP ( FCC ID: K7S-F6D3000V2 ) is limited in

CH1~CH11 for 2.4 GHz by specified firmware controlled in U.S.A.

Содержание F6D3000-HP















































Результаты поиска

Содержание F6D3000-HP

Отзывы:

Похожие инструкции для F6D3000-HP

Бренды по названию

Популярные бренды

Belkin F6D3000-HP, Руководство пользователя

Результаты поиска

Содержание F6D3000-HP

Отзывы:

Похожие инструкции для F6D3000-HP

Бренды по названию

Популярные бренды