Specifying TCP/IP Parameters
1 2
This configuration procedure is identical to that of other
network interfaces, for example, an Ethernet card.
To access and change the networking properties
in Windows
®
9 8
1.
Select "My Computer" / "Control Panel" / "Network".
2.
The Network Configuration window appears. In this
window, the USB Ethernet Adapter icon should be
visible.
3.
To configure TCP/IP settings, select "TCP/IP -> Belkin
USB Ethernet Adapter" and click "Properties". To
specify an IP address select "Specify an IP address".
Note:
If you are connecting to an existing network,
please see your system administrator for this
information. If you are setting up a new network,
we recommend the following:
Suggested IP Address = 194.168.0.X (where "X"
is greater than 0 and less than 255).
Suggested Subnet Mask = 255.255.255.0
4.
Enter a valid IP Address and Subnet Mask and click
"OK".
5.
Select the "Identification" tab and verify/modify the
computer name and workgroup and click "OK".
You will see the option to restart the computer if you
made any changes. Click "Yes" to restart the computer.
After the computer starts, the changes you made will take
effect.
P73631_F5U122-PC-man.qxd 4/26/01 10:14 AM Page 12
