Driver Installation
(continued)
1 0
5. The "Add New Hardware Wizard" will appear telling you
"Windows has found the following hardware: USB
Ethernet Adapter". Place a checkmark next to
"Automatic search for a better driver (recommended)"
and click "Next".
6. The system may prompt you to insert your Windows Me
CD. Insert the CD and select "OK".
7. The "Add New Hardware Wizard" will indicate, "Belkin
USB Ethernet Adapter" and "Windows has finished
installing the hardware device". Click "Finish".
8. Windows will now prompt you to restart your
computer. Click "Yes" to complete the installation.
Once your computer has restarted, the Belkin USB 10/100
Ethernet Adapter will be active and working. If you are
connecting to a cable modem or xDSL modem, follow the
directions that came with your modem or from your
Internet provider.
If you are setting up a network, go to the section titled
"Specifying TCP/IP Parameters" to configure your adapter.
Windows
®
2 0 0 0
1. Close any Windows applications that you may be
running on your computer.
2. Insert the Belkin USB 10/100 Ethernet Adapter floppy
disk into your floppy drive.
3. Connect the USB cable to your computer and connect
the cable to the USB Ethernet Adapter.
P73631_F5U122-PC-man.qxd 4/26/01 10:14 AM Page 10
