Belkin F5D76314 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 61

background image

F5D7631-4_Manual

Page 59 of 61

This equipment generates, uses, and can radiate radio frequency energy. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged
to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Modifications

The FCC requires the user to be notified that any changes or modifications to this
device that are not expressly approved by Belkin Corporation may void the user¡¦s
authority to operate the equipment.

Canada-Industry Canada (IC)

The wireless radio of this device complies with RSS 139 & RSS 210 Industry
Canada. This Class B
digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003 du
Canada.

Europe-European Union Notice

Radio products with the CE 0682 or CE alert marking comply
with the R&TTE Directive (1995/5/EC) issued by the Commission of the
European Community.
Compliance with this directive implies conformity to the following European
Norms (in brackets
are the equivalent international standards).
• EN 60950 (IEC60950) – Product Safety
• EN 300 328 Technical requirement for radio equipment
• ETS 300 826 General EMC requirements for radio equipment.
To determine the type of transmitter, check the identification label on your Belkin
product.
Products with the CE marking comply with the EMC Directive (89/336/EEC) and
the Low Voltage
Directive (72/23/EEC) issued by the Commission of the European Community.
Compliance with
these directives implies conformity to the following European Norms (in brackets
are the
equivalent international standards).
• EN 55022 (CISPR 22) – Electromagnetic Interference

The availability of some specific channels and/or operational frequency bands are country

dependent and are firmware programmed at the factory to match the intended destination.

The firmware setting is not accessible by the end user.

«
...
57
58
59
60
61
»

Содержание F5D76314






























































Отзывы:

Нет отзывов

Похожие инструкции для F5D76314

NetLink 1082/144

Бренд: Patton electronics Страницы: 32

Бренд: FALCOM Страницы: 22

Бренд: Funk-Electronic Piciorgros Страницы: 284

Бренд: Aztech Страницы: 32

Бренд: RF Neulink Страницы: 52

Бренд: Multitech Страницы: 49

G.SHDSL.bis 3010E

Бренд: netsys Страницы: 105

Бренд: Sierra Wireless Страницы: 38

Бренд: Zoom Страницы: 2

Бренд: Zoom Страницы: 2

Бренд: ALZA Страницы: 32

Бренд: NETGEAR Страницы: 2

5G WI-FI PRO MU500

Бренд: Telstra Страницы: 26

Бренд: Hanna Instruments Страницы: 2

Бренд: Viola Systems Страницы: 21

Бренд: Zhone Страницы: 2

Бренд: Maestro Страницы: 219

Бренд: Zte Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды