38
UNDERSTANDING THE WEB-BASED USER INTERFACE
Follow these steps to add a schedule:
1.
Click “Add Schedule Rule”.
2.
You will see the following screen.
3.
To configure the Schedule Rule, specify the Name, Comment, Start Time, and
End Time that you want to filter on your network.
4.
Click “OK” and then “Apply Changes” to save your settings.
5.
To complete this configuration, you will need to create or modify an access
rule in the Client IP filters section. This activates the schedule for use in the
“Access Control” page.
MAC Address Filtering
The MAC Address Filter is a powerful security feature that allows you to specify
which computers are allowed on the network. Any computer attempting to access
the network that is not specified in the filter list will be denied access. When you
enable this feature, you must enter the MAC address of each client on your
network to allow network access to each, or copy the MAC address by selecting
the name of the computer from the “DHCP Client List”. To enable this feature,
select “Enable”. Next, click “Apply Changes” to save the settings.
