background image

INTRODUCTION

2

SPI Firewall

Your Router is equipped with a firewall that will protect your network from a wide
array of common hacker attacks including IP Spoofing, Land Attack, Ping of
Death (PoD), Denial of Service (DoS), IP with zero length, Smurf Attack, TCP Null
Scan, SYN flood, UDP flooding, Tear Drop Attack, ICMP defect, RIP defect, and
fragment flooding.

Integrated 10/100 4-Port Switch

The Router has a built-in, four-port network switch to allow your wired
computers to share printers, data and MP3 files, digital photos, and much more.
The switch features automatic detection so it will adjust to the speed of
connected devices. The switch will transfer data between computers and the
Internet simultaneously without interrupting or consuming resources.

Built-In Dynamic Host Configuration Protocol

(DHCP) on-board makes for the

easiest possible connection of a network. The DHCP server will assign IP
addresses to each computer automatically so there is no need for a complicated
networking setup.

MAC Address Filtering

For added security, you can set up a list of MAC addresses (unique client
identifiers) that are allowed access to your network. Every network interface card
has its own unique MAC address. Simply enter these MAC addresses into a list
using the web-based user interface and you can control access to your network.

Applications and Advantages

• Economically connect multiple computers to a single Internet connection

• SOHO (Small Office/Home Office) networking needs

Provides the easy and quick small network installation SOHO users need

Содержание F5D7630





































































Отзывы: