Belkin F5D70010, Руководство пользователя

Страница: 34 / 46

33 32 33 32
Troubleshooting
If you are using a Belkin 802.11b Wireless Router, the default
name should be “WLAN”.
If you are NOT using a Belkin Router, please consult your router
manufacturer’s user manual for the default name.
The name of your wireless network appears in
“Available Networks”
If the correct network name is listed in the “Available Networks”
list, please follow the steps below to connect wirelessly:
1.
Click on the correct network name in the “Available Networks” list
to connect to the network.
2.
If the network has security (encryption) enabled, you will need
to enter the network key. For more information regarding
security, see the “Securing your Wi-Fi Network” section of this
User Manual.
3.
Within a few seconds, the tray icon in the lower,
right-hand corner of your screen should turn green, indicating
a successful connection to the network.
If you are still unable to access the Internet after connecting to
the wireless network, please contact Belkin Technical Support.
The name of your wireless network DOES NOT appear in the list
of “Available Networks”
If the correct network name is not listed, check the SSID settings
to see if they match. The SSID is case-sensitive and the spelling
on each computer must be exactly the same in order for the Card
to connect to the wireless router (or access point).
Note: To check the SSID settings or look for an available
network, double-click the Signal Indicator icon to bring up the
Belkin Wireless Utility, and then click on the “Configure” tab.
Click on the “Network SSID” box if you do not see the network
you are trying to connect to and type in the SSID of the router (or
access point) you are trying to connect to. Next, click “Apply” to
save the setting. For more information about setting up an SSID,
please reference your router manufacturer’s user manual. If issues
persist even at close range, please contact Belkin
Technical Support.