background image

11

Contacting Belkin Components

Corporate Headquarters

Atlanta Office

Belkin Components, Ltd.

501 West Walnut Street

Compton, CA 90220
310-898-1100 voice

310-898-1111 fax

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.  These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if no installed and used in accordance with the instructions, may cause harmful interference to radio

communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

 

Reorient or relocate the receiving antenna.

 

Increase separation between the equipment and receiver.

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 

Consult the dealer or an experienced radio technician for help.

CE Declaration of Conformity

We, Belkin Components, declare under our sole responsibility that the F1U109, to which this declaration relates, is in conformity with Generic
Emissions Standard EN50081-1 and with Generic Immunity Standard EN50082-1 1992.

Belkin Components Lifetime Limited Warranty
Belkin Components warrants this product against defects in materials and workmanship for its lifetime.  If a defect is discovered, Belkin will, at its

option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the
authorized Belkin dealer from whom you purchased the product.  Proof of purchase may be required.

This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified

without the written permission of Belkin; or if any Belkin serial number has been removed or defaced.

THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR

IMPLIED.  BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.

BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR

UNDER ANY LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING, OR
REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.

Some states do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied warranties, so the above

limitations of exclusions may not apply to you.  This warranty gives you specific legal rights, and you may also have other rights that vary from state
to state.

Содержание F1U109












Отзывы: