15
Belkin Advanced Secure 2-port Flip KVM Switch User Manual
InsTallaTIon
SECTIONS
Table of Contents
1
2
4
5
6
3
before Installation
Important:
1. If the unit’s enclosure appears disrupted or if all channel-select LEDs
flash continuously, please remove product from service immediately
and contact Belkin Technical Support at
(800) 282-2355
.
2. Do not connect product to computing devices:
a. That are TEMPEST computers;
b. That include telecommunication equipment;
c. That include frame grabber video cards;
d. That include special audio processing cards.
unpacking the Product
Before opening the product packaging, inspect the packaging seal
condition to assure that product was not accessed or tampered
during delivery. If the packaging seal looks suspicious, contact Belkin
Technical Support and do not use the product.
After removing the packaging seal, please inspect packaging content to
verify that required components are included as listed in the Package
Contents of this manual.
After the Belkin Secure Flip KVM Switch is removed from its packaging
materials, inspect the tampering-evident label to assure that product
is properly sealed. If one or more label is damaged or missing, contact
Belkin Tech Support and do not use that product.
Consider the following when deciding where to place the switch:
• Access to the front-panel push buttons
• The lengths of the cables attached to your keyboard and mouse
• The location of your computers in relation to your console
Warning:
Avoid placing cables near fluorescent lights, air-
conditioning equipment, or machines that create electrical noise
(e.g., vacuum cleaners).
Important:
As the unit powers up it performs a self-test procedure. In
case the self- test has failed for any reason the product LED behavior
will be abnormal as described in User Guidance section. Try to
power cycle the unit. If problem persists please contact your system
administrator or Technical Support.
