Belkin F1DN102C, Руководство пользователя

Страница: 18 / 63

Belkin® Secure DVI KVM Switch, Secure KM Switch and
Secure Windowing KVM EAL 4 augmented ALC_FLR.3 Security Target Rev. 1.01
Page | 18
Section 6 presents the Security Functional Requirements (SFRs) met by the TOE, and the
security functional requirements rationale. In addition, this section presents Security Assurance
Requirements (SARs) met by the TOE, as well as the assurance requirements rationale.
Summary Specification (Section 7)
This section describes the security functions provided by the TOE and how they satisfy the
security functional requirements. It also describes the security assurance measures for the TOE
and the rationale for the assurance measures.
1.5 Document Conventions
The CC defines four operations on security functional requirements. The descriptions below
define the conventions used in this ST to identify these operations. When NIAP interpretations
are included in requirements, the additions from the interpretations are displayed as
refinements.
Assignment: indicated with bold text
Selection: indicated with underlined text
Refinement: additions indicated with bold text and italics deletions indicated with strike ‐
through bold text and italics
Iteration: indicated with typical CC requirement naming followed by a lower case letter for
each iteration (e.g., FMT_MSA.1a)
Extended: indicated as per the applicable PP (e.g. EXT_VIR.1)
1.6 Document Terminology
Please refer to CC Part 1 Section 4 for definitions of commonly used CC terms.
1.6.1 ST Specific Terminology
Attribute (See Peripheral Port Group ID)