12
InsTallaTIon
Belkin Modular Secure KM Switch
SECTIONS
InsTallaTIon
before Installation
unpacking the Product
Before opening the product packaging, inspect the packaging seal condition to
assure that product was not accessed or tampered during delivery. If the packaging
seal looks suspicious, contact Belkin Technical Support and do not use the product.
After removing the packaging seal, please inspect packaging content to verify that
required components included as listed in the Package Contents of this manual.
After the Belkin Secure KM is removed from its packaging materials, inspect the
tampering-evident label to assure that product is properly sealed. If the label is
damaged or missing, contact Belkin Tech Support and do not use that product.
Where to place the switch:
The enclosure of the Switch is designed for desktop or under-the-desk, or VESA
mount configurations. The optional Mount Kits PN F1DN-MOD- Mount (under desk)
and PN F1DN-MOD-VMOUNT (VESA Mount) are available for installation. Contact
Belkin sales for specifications and delivery.
Consider the following when deciding where to place the switch:
• Access to the top-panel push buttons may not be required, since the
switching can be done through the Guard Mode Switching (GMCS) interface
or included remote control
• The location of your computers in relation to your console
• The lengths of the cables (6 feet) you use to connect your computers to
the Switch
Warning:
Avoid placing cables near fluorescent lights, air-conditioning equipment,
or machines that create electrical noise (e.g., vacuum cleaners).
Important:
If the unit’s enclosure appears disrupted, please remove product from service
immediately and contact belkin Technical support at (800) 282-2355.
1.
Do not connect product to computing devices:
a. That include telecommunication equipment;
b. That include frame grabber video cards;
c.
That include special audio processing cards.
