ENGLISH
Belinea 1945 G1 - Operating Instructions - 1
INTRODUCTION
This manual will familiarize you with the installation
and use of your Belinea monitor. Please take the time
to look through these instructions even if you are fa-
miliar with monitors.
We have taken all possible care to ensure that this
manual contains correct and accurate information.
However the manufacturer cannot assume liability for
any possible errors. In addition, the manufacturer can-
not guarantee that the hardware will meet the pur-
pose you require. We would appreciate reports of any
errors, suggestions or criticism.
© Copyright
2006,
MAXDATA Systeme GmbH,
45768 Marl, Germany,
www.maxdata.com
Editing, DTP and translation by Linguagem, www.Lin-
guagem.de.
All rights reserved. No part of this manual may be re-
produced, processed or distributed in any form (print,
photocopy, microfilm or any other process) or proc-
essed, duplicated or distributed by an electronic sys-
tem without prior written permission from the
manufacturer.
We reserve the right to make changes according to
the technical progress. Belinea is an internationally
registered trademark. Other brand names may be reg-
istered trademarks and must be treated as such.
Environment protection
We are all responsible for the environment: As many
of our customers are already familiar with monitors
we have not printed this manual in order to save paper
and by this protect our environment. Help to protect
the environment and only print the pages you need.
TABLE OF CONTENTS
INTRODUCTION...................................................... 1
IMPORTANT INFORMATION................................... 2
UNPACKING ............................................................. 2
MOUNTING .............................................................. 3
CONNECTION .......................................................... 3
START UP................................................................. 3
ERGONOMICS ......................................................... 4
CONFIGURATION..................................................... 4
SETTINGS................................................................. 5
CARING FOR YOUR MONITOR ............................... 7
TROUBLESHOOTING............................................... 8
TECHNICAL SPECIFICATIONS................................. 9
MAXDATA WARRANTY ........................................... 9
Guide to symbols
The symbols below are used in this manual to indicate
where there is risk of injury or damaging devices or to
indicate specially useful information.
DANGER! Indicates risk of injury. When not
following the instructions, severe injury or
death may result.
ATTENTION! Indicates possible damage to de-
vices. When not following instructions, devic-
es may be heavily damaged.
IMPORTANT! Indicates hints on operation and
other useful information.
