14
- Belinea 10 20 05
ENGLISH
Blank Screen
Power indicator is off
-
Check if the power cable is connected properly (see section “Connecting”).
-
Make sure that the monitor was turned on using the power switch (see section “Startup”).
Power indicator lights orange
-
A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard
or move the mouse.
“No Signal” message
-
Is the signal cable connected to the monitor and the PC’s graphics port (see section “Connecting”)?
-
Is the PC turned on (see your PC’s documentation)?
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
LCD panel
20.1 inch diagonal size (51.05 cm visible), low radiation according to TCO ’03, certifi ed
to ISO 13406-2, pixel fault class II, Premium-MVA panel technology
Contrast ratio
700:1
(typical)
Viewing angle
horizontal
170
°
, vertical 170
°
(typical)
Response time
Rise time: 15 ms, Fall time: 10 ms (typical)
Brightness
250
cd/m
2
(typical)
Input signal
Video: analog (Mini-D-SUB) and digital (DVI-D)
Display colors
16.7 mill. colors
Synchronization
30–83 kHz horizontal, 50–85 Hz vertical
Video band width
162 MHz (pixel rate)
Ergonomic resolution
1600
×
1200 (60 Hz)
Audio
Amplifi er: 1 W at 8 Ohms
Loudspeaker: 1 W continuous load, 1.5 W peak power
Power connection
Input: 100–240 V AC, 50/60 Hz
Power consumption
ON status: max. 60 W; color of the status LED: green
SLEEP status: < 3 W; color of the status LED: amber
Power saving functions EPA certifi ed
Dimensions / weight
Width: 457.9 mm, height: 452.1 mm, depth: 198.3 mm; 6.17 kg (net)
Operating environment
Operation: 0 to +35
°
C, humidity: 20–80 % (without condensation)
Storage: -20 to +60
°
C, humidity: 10–90 % (without condensation)
Display Problems
Image is displaced to the left/right or to the top/bottom
-
If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see
chapter “Basic Setup”, section “Automatic image adjustment”.
Image flickers or is shaky
- Perhaps setup fi le chosen for the monitor is incorrect. For information on monitor setup under Windows
®
9x/
ME/2000/NT/XP consult the “Confi guration” section.
Image is blurred
-
Check brightness and contrast settings (see chapter “OSD Menu Functions”, section “Brightness/Contrast”).
-
Check the resolution setting (see “Other” functions in the “OSD Menu Functions” section).
Color problems
-
If the colors are off (e.g. white is not really displayed as white, etc.), you should adjust the color temperature (see
“Color” function in section “OSD Menu Functions”).
