Adjustable angle of rotation
Adjustable angle of rotation with mechanical end stops. A minimum permissible angle
of rotation of 30° must be allowed for. The housing cover must be removed to set the
angle of rotation.
Home position
The first time the supply voltage is switched on, i.e. at the time of commissioning,
the actuator carries out an adaption, which is when the operating range and position
feedback adjust themselves to the mechanical setting range.
The detection of the mechanical end stops enables a gentle approach to the end
positions, thus protecting the actuator mechanics.
The actuator then moves into the position defined by the positioning signal.
Y = 0 V
cw
Y = 0 V
ccw
1
0
Adaption and synchronisation
An adaption can be triggered manually by pressing the “Adaption” button. Both
mechanical end stops are detected during the adaption (entire setting range).
Automatic synchronisation after pressing the gear disengagement button is configured.
The synchronisation is in the home position (0%).
The actuator then moves into the position defined by the positioning signal.
Accessories
Description
Type
Electrical accessories
Auxiliary switch, add-on, 1 x SPDT
S1A
Auxiliary switch, add-on, 2 x SPDT
S2A
Feedback potentiometer 140 Ohm, add-on
P140A
Feedback potentiometer 200 Ohm, add-on
P200A
Feedback potentiometer 500 Ohm, add-on
P500A
Feedback potentiometer 1 kOhm, add-on
P1000A
Feedback potentiometer 2.8 kOhm, add-on
P2800A
Feedback potentiometer 5 kOhm, add-on
P5000A
Feedback potentiometer 10 kOhm, add-on
P10000A
Signal converter voltage/current, supply AC/DC 24V
Z-UIC
Digital position indicator for front-panel mounting, 0...99%, front mass
72 x 72 mm
ZAD24
Range controller for wall mounting, adjustable electron. Min./max.
angle of rotation limitation
SBG24
Positioner for wall mounting, range 0...100%
SGA24
Positioner in a conduit box, range 0...100%
SGE24
Positioner for front-panel mounting, range 0...100%
SGF24
Positioner for wall mounting, range 0...100%
CRP24-B1
Description
Type
Mechanical accessories
Cable gland, for cable diameter 4-10
Z-KB-PG11
SMQ24G-SR
Damper actuator, IP66, Modulating, AC/DC 24 V, 16 Nm,
Running time motor 7 s
Product features
www.belimo.eu
SMQ24G-SR • en-gb • 2015-10-16 • subject to changes
3
