High functional reliability
The actuator is overload protected, requires no limit switches and automatically stops
when the end stop is reached.
Home position
The first time the supply voltage is switched on, i.e. at the time of commissioning, the
actuator carries out a synchronisation. The synchronisation is in the home position
(0%).
The actuator then moves into the position defined by the positioning signal.
Y = 0%
cw
Y = 0%
ccw
1
0
Adaption and synchronisation
An adaption can be triggered manually by pressing the “Adaption” button or with the
PC-Tool. Both mechanical end stops are detected during the adaption (entire setting
range).
Automatic synchronisation after pressing the gearbox disengagement button is
configured. The synchronisation is in the home position (0%).
The actuator then moves into the position defined by the positioning signal.
A range of settings can be adapted using the PC-Tool (see MFT-P documentation)
Accessories
Description
Type
Electrical accessories Auxiliary switch 1 x SPDT add-on
S1A
Auxiliary switch 2 x SPDT add-on
S2A
Auxiliary switch 2 x SPDT add-on, grau
S2A/300 GR
Auxiliary switch 2 x SPDT add-on, grau
S2A/500 GR
Feedback potentiometer 140 Ω add-on
P140A
Feedback potentiometer 140 Ω add-on, grau
P140A GR
Feedback potentiometer 200 Ω add-on
P200A
Feedback potentiometer 500 Ω add-on
P500A
Feedback potentiometer 500 Ω add-on, grau
P500A GR
Feedback potentiometer 1 kΩ add-on
P1000A
Feedback potentiometer 1 kΩ add-on, grau
P1000A GR
Feedback potentiometer 2.8 kΩ add-on
P2800A
Feedback potentiometer 2.8 kΩ add-on, grau
P2800A GR
Feedback potentiometer 5 kΩ add-on
P5000A
Feedback potentiometer 5 kΩ add-on, grau
P5000A GR
Feedback potentiometer 10 kΩ add-on
P10000A
Feedback potentiometer 10 kΩ add-on, grau
P10000A GR
Connection cable 5 m, A: RJ11 6/4 ZTH EU, B: 6-pin for connection to
service socket
ZK1-GEN
Connection cable 5 m, A: RJ11 6/4 ZTH EU, B: free wire end for
connection to MP/PP terminal
ZK2-GEN
Description
Type
Mechanical accessories Actuator arm for standard shaft clamp
AH-GMA
Ball joint suitable for damper crank arm KH8 / KH10
KG10A
Damper crank arm Slot width 8.2 mm, clamping range Ø14...25 mm
KH10
Anti-rotation mechanism 230 mm
Z-ARS230
Mounting kit for linkage operation for flat installation
ZG-GMA
Base plate extension for GM..A to GM..
Z-GMA
Position indicator
Z-PI
Description
Type
Service Tools Service Tool, with ZIP-USB function, for parametrisable and
communicative Belimo actuators / VAV controller and HVAC
performance devices
ZTH EU
Belimo PC-Tool, Software for adjustments and diagnostics
MFT-P
Adapter for Service-Tool ZTH
MFT-C
GM24A-MOD
Rotary actuator, modulating, communicative, hybrid, AC/
DC 24 V, 40 Nm
Product features
www.belimo.com
GM24A-MOD • en-gb • 2020-04-21 • subject to changes
3
