56
Setting the alarm clock
Gigaset C590/C595 / BEL EN / A31008-M2101-E101-1-3F19 / registr_sett.fm / 11.08.2009
Ve
rs
ion 4,
16
.09.
2005
Setting the alarm clock
Precondition:
The date and time have
already been set (
¢
page 14).
Activating/deactivating the alarm
clock and setting the wake-up time
v
¢
É
¢
Alarm Clock
¤
Change multiple line input:
Activation:
Select
On
or
Off
.
Time:
Enter the wake-up time in 4-digit for-
mat.
Volume:
Set the volume (1–6).
Melody:
Select melody.
§Save§
Press the display key.
In idle status, the
¼
icon and wake-up
time are displayed.
A wake-up call is signalled on the display
and with the selected ringtone
(
¢
page 2). The wake-up call sounds for
60 seconds. If no key is pressed, the wake-
up call is repeated twice at five minute
intervals and then switched off.
During a call, the wake-up call is only sig-
nalled by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze mode)
Precondition
: A wake-up call is sounding.
§OFF§
Press the display key. The
wake-up call is deactivated.
or
§Snooze§
Press the display key or any
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
Using several handsets
Registering handsets
You can register up to six handsets to your
base.
A handset can be registered on up to four
bases.
Manual registration on Twist 600/610
You must activate manual registration of
the handset on both the handset and the
base.
When the registration process has com-
pleted successfully, the handset returns to
idle status. The handset's internal number
is shown in the display e.g.
INT 1
. If not,
repeat the procedure.
On the handset
The handset must not be registered to a
base.
§Register§
Press the display key.
The handset is already registered to a
base:
v
¢
Ï
¢
Registration
¢
Register Handset
If the handset is already registered on four
bases:
s
Select base, e.g.
Base 3
and
press
§OK§
.
~
If required, enter the system
PIN for the base and press
§OK§
.
A message displays that a search for a base
that is ready for registration is being car-
ried out.
On the base
Within 60 seconds press and
hold
the reg-
istration/paging key on the base
(
¢
page 3) (approx. 3 seconds).
Содержание Twist 610
Страница 1: ...Belgacom Twist 610 User manual...