Belden PPC HAPI Miniflex Скачать руководство пользователя страница 14

Страница: 14 / 24

This product may be protected by one or more patents • For further information, please visit: www.ppc-online.com/patents

[email protected] • 1-800-800-6652 • www.ppc-online.com

HAPI™ Miniflex

Cable

Installation Tool

User Manual

The cable must pass through the Cable Guide and between the large (drive) wheel and the small (auxiliary) wheel.
The steps below are guidelines only.

It is recommended to insert the cable prior to connecting the microduct but operators should find a practice that
suits them best. Instructions for connecting the microduct to the HAPI™ Tool are detailed in the section 3.5 of this
document.

1. Turn the tensioning knob to raise the auxiliary wheel and allow the cable to pass between the auxiliary wheel and
the drive wheel.

2. Hold the cable and thread it through or press it into the cable guide.

3. Pull about 1 m (approx. 3 ft) of cable through the tool and between the two wheels.

4. Turn the tensioning knob to lower the auxiliary wheel onto the cable.

3.4 Inserting the Cable

Содержание PPC HAPI Miniflex

























Результаты поиска

Содержание PPC HAPI Miniflex

Отзывы:

Похожие инструкции для PPC HAPI Miniflex

Бренды по названию

Популярные бренды

Belden PPC HAPI Miniflex, Руководство пользователя

Результаты поиска

Содержание PPC HAPI Miniflex

Отзывы:

Похожие инструкции для PPC HAPI Miniflex

Бренды по названию

Популярные бренды