HCP-1801 HD/SD SDI Control Probe
Guide to Installation and Operation
Page 22 of 27
HCP-1801
Audio – Max Level
Check whether the mean audio level remains above
a high-level threshold (both channels checked
separately)
Enable Ch1 / Enable Ch2:
check to enable this test
Threshold:
set the level (in dB) above which an
Audio Max Level error will be flagged
Duration, Occurrence and Interval:
Set up the error
detection window using the sliders.
•
See page 9 for definitions of these variables
Audio – Dynamics
Determine whether the difference between the
maximum and minimum mean levels remains below
a given threshold (both channels checked
separately)
Enable Ch1 / Enable Ch2:
check to enable this test
Threshold:
set the level (in dB) below which an
Audio Dynamics error will be flagged
Duration, Occurrence and Interval:
Set up the error
detection window using the sliders.
•
See page 9 for definitions of these variables
Audio – Phase
Detect phase errors (channels checked together)
Enable Ch 1 & 2:
check to enable this test
Threshold:
set the level (in degrees) above which an
audio phase error will be flagged
Duration, Occurrence and Interval:
Set up the error
detection window using the sliders.
•
See page 9 for definitions of these variables
Audio – Stereo Width
Detect stereo width errors (channels checked
together)
Enable Ch 1 & 2:
check to enable this test
Threshold:
set the level below which this condition
will be flagged
Duration, Occurrence and Interval:
Set up the error
detection window using the sliders.
•
See page 9 for definitions of these variables.
