Belden Hirschmann SPIDER Standard Line Series, Руководство пользователя

Страница: 13 / 34

Installation SPIDER-SL PoE
Release 01 05/2019
13
1.4 Power supply
You have the following options to supply your device with voltage:

Power supply via a 4-pin terminal block
For the power supply of the device, a 4-pin terminal block is
available.
For further information see
“Wiring the terminal block for the supply
voltage
and the grounding”
on page 22 .
1.5 Ethernet ports
You can connect end devices and other segments to the device ports
using twisted pair cables or optical fibers (F/O).
The PoE port of the device (Endpoint PSE) supplies voltage to the
twisted pair cables via the wire pairs carrying the signal (Alternative A)
You find information on pin assignments for making patch cables here:
“Pin assignments” on page
15
1.5.1 10/100/1000 Mbit/s twisted pair port
This port is an RJ45 socket.
The 10/100/1000 Mbit/s twisted pair port offers you the ability to connect
network components
This port supports:

Autonegotiation

Autopolarity

Autocrossing

1000 Mbit/s full duplex

100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode

10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
1.5.2 10/100/1000 Mbit/s PoE port
This port is an RJ45 socket.
The 10/100/1000 Mbit/s PoE port allows you to connect network
components such as a powered device (PD)
This port supports:

Autonegotiation

Autopolarity

Autocrossing

1000 Mbit/s full duplex