Belden Hirschmann BAT867-F, Руководство пользователя, Страница: 7 / 54

Installation BAT867-F
Release 01 12/2019
7

National and international safety regulations

Verify that the electrical installation meets local or nationally applicable
safety regulations.

When installing antennas, observe the regulations of the country in
which you are operating the WLAN device with regard to the general
operating permission and the maximum emission levels.

Install and operate this equipment with a minimum distance of
19.7 inches (50 cm) between the antenna and your body.

Grounding the device
For the functional earth (FE), there is a separate functional earth screw on
top of the device. The functional earth is electrically connected to the
circuit ground and the metal housing of the device.

Shielding ground
The overall shield of a connected shielded twisted pair cable is connected
to the grounding connector on the front panel as a conductor.

Beware of possible short circuits when connecting a cable section with
conductive shielding braiding.