Belden Hirschmann BAT867-F, Руководство пользователя, Страница: 40 / 54

40
Installation BAT867-F
Release 01 12/2019
10 Technical data
10.1 General technical data
Dimensions
W × H × D BAT867-F See “Dimension drawings” on page 41.
Weight approximately 31.75 oz (900 g)
Supply voltage Rated voltage 24 V DC
Voltage range incl. maximum
tolerances 18 V DC ... 32 V DC
Connection type 8-pin, “X”-coded M12 socket for PoE port or
a 5-pin, “A”-coded M12 plug
Tightening
torque of the
locking screw
5.3 lb-in (0.6 Nm)
Power loss buffer 10 ms at 19.2 V DC
Overload current protection on
the device Non-replaceable fuse
Back-up fuse Nominal rating: 3.5 A
Characteristic:
slow blow
Peak inrush current (slow
voltage increase) <3.5 A
Current integral I²t 0.373 A
2
s
Climatic
conditions during
operation Minimum clearance around the
device Top and bottom sides of device: 2 in (5 cm)
Left and right device side: 0.79 in (2 cm)
Ambient air temperature
a
a. Temperature of the ambient air at a distance of 2 in (5 cm) from the device
Devices with operating temperature
characteristic value L (standard):
+14 °F ... +140 °F (
− 10 °C ... +60 °C)
Devices with operating temperature
characteristic value E and T (extended):
-40 °F ... +158 °F (-40 °C ... +70 °C)
Maximum inner temperature of
device (guideline) 194 °F (90 °C)
Humidity 10 % ... 95 % (non-condensing)
Air pressure min. 700 hPa (+9842 ft; +3000 m)
max. 1060 hPa (-1312 ft; -400 m)
Climatic
conditions during
storage Ambient air temperature
a
-40 °F ... +158 °F (-40 °C ... +70 °C)
Humidity 10 % ... 95 % (non-condensing)
Air pressure min. 700 hPa (+9842 ft; +3000 m)
max. 1060 hPa (-1312 ft; -400 m)
Pollution degree 2
Protection classes Degree of protection IP65/67
b
b. To preserve the suitability of your device for IP65/67, proceed as follows: Remove all
provided transport protection caps and transport protection screws. Seal unused sockets
and plugs with your desired type of protection screws which you can order separately.