
UM Configuration BAT-C2
84
Release 01.0.00 04/2019
3: Configuration Using Web Manager
This chapter describes how to configure the BAT-C2 using Web Manager, the Hirschmann
browser-based configuration tool. The gateway’s configuration is stored in non-volatile memory
and is retained across gateway reset and during loss of power to the gateway. All changes take
effect immediately, unless otherwise noted. This chapter contains the following sections:
Accessing Web Manager
Web Manager is normally accessed through a standard web browser. For further instructions, see
the “Installation User Manual” available as PDF download on the Internet at the Hirschmann
product pages (
To access Web Manager through a web browser:
1. Open a standard web browser. Hirschmann supports the latest versions of Internet Explorer®,
Firefox®, Safari®, or Chrome™ web browsers.
2. Enter the IP address or host name of the BAT-C2 in the address bar. The factory-default IP
address on ETH is 192.168.1.1/24.
3. Enter your username and password. The factory-default username is “
admin
” and the factory-
default password is “
private
”. The Status web page (see ) displays current configuration and
status details for the gateway and network settings.