Belden HIRESCHMANN IT MAMMUTHUS MTM8003-FAN, Руководство пользователя

Страница: 11 / 84

11
Installation MTS8003/8006/8010
Release 01 12/2021

Device casing
Only technicians authorized by the manufacturer are permitted to open
the casing.

Keep the cooling fins free to ensure good air circulation.

Verify that there is at least 10 cm (3.94 in) of space around the
cooling fins of the casing.

Install the device horizontally in the cabinet or vertically on a flat
surface. Operating the device as a table unit is inadmissible.
See “Installing and grounding the device” on page 52.

Operate the device at the maximum ambient air temperature and in
stacking: when to install the device, confirm that there is at least one
available rack space (approximately 5 cm) above the device to allow
heat to escape through the enclosure of the device.

If you operate the device in 19” switch cabinet: install the slide / rails
to support the weight of the device.

Installation site requirements
Operate the device at the specified ambient temperature (temperature
of the ambient air at a distance of 5 cm (2 in) from the device) and at
the specified relative humidity exclusively.

When you are selecting the installation location, confirm that you
observe the climatic threshold values specified in the technical data.

Use the device in an environment with a maximum pollution degree
that complies with the specifications in the technical data.