Belden grass valley VERTIGO XG, Инструкция по установке и быстрому запуску

Страница: 29 / 37

17
Vertigo XG
Installation and Quick Start Guide
Unpacking and Verifying the Vertigo XG Shipped Items
The Vertigo XG device is packaged and shipped with the items listed in the table below. As
you unpack the contents of the shipment, please verify the completeness and condition of
the contents of your received shipment. We also recommend that before attempting to
install the unit you use the table below to familiarize yourself with each of the items related
to the Vertigo XG.
Note: If any damage occurred during transportation or if any items are
missing from the package, please contact Grass Valley.
1 x 3RU Vertigo XG chassis The Vertigo XG is available in two (2) standard models:
• VX-Vertigo-XG21-e
The Vertigo XG single channel graphics engine (2 inputs, 1 output).
• VX-Vertigo-XG22-e
Vertigo XG dual channel graphics engine (2 inputs, 2 outputs).
Rack mounting kit • 2 x rail assemblies
• Rail screws
• Rail adapters (2) for mounting the chassis in a role-hole equipment
rack.
AC power cables
Two (2) power cables are provided, which connect to the
Vertigo XG’s power supplies.
Video breakout cable Depending on the model, Vertigo XG devices offer two (2)
video SD/HD input channels with one or two video SD/HD
output channels.
The breakout cable is used to connect the Video Card I/O
connector to 2 SDI inputs, 1 reference input, 1 reference
output, and 4 SDI outputs.
Discrete (AES) audio
breakout cable Single channel Vertigo XG units (XG21-e) have one discrete
(AES) audio connector, while dual channel Vertigo XG units
(XG22-e) have two discrete (AES) audio connectors.
For each physical SDI video output, there will be a discrete
audio breakout cable. Each discrete audio breakout cable
contains 4 BNC inputs and 8 BNC outputs. Each BNC connector
represents 1 stereo pair (2 channels) of digital AES/EBU audio.
Therefore, each discrete audio breakout cable contains 4
stereo pairs (8 channels) of input and 8 stereo pairs (16
channels) of output.
VGA/DVI monitor adapter A computer monitor is required during the Vertigo XG’s initial
setup, which involves using the Vertigo XG’s desktop
applications, including Dashboard.
The Vertigo XG’s graphics card connectors allow you to
connect to a DVI monitor. If you prefer, you can use the
VGA/DVI adapter to connect the Vertigo XG device to VGA
monitor.
Note that although there are DVI and DisplayPort connectors,
the Vertigo XG can display to only one monitor. Therefore, it
does not matter which of the three connectors the monitor’s
cable is connected to.