background image

10

Rev 1.3  • 25 Nov 14

NV9700

Specifications

Specifications

Power Supply:

PS0001-00. External, 12VDC at 2.5A.

Dimensions:

19.0

 W × 1.72

 H × 1.95

 D. [482.6 mm × 43.7 mm × 49.4 mm]

Weight:

1.69

 

lb [0.765

 

kg].

Power:

 4.5 W.

Relay limit: 

V

OFF

 (output dielectric strength) 

 200 V

Continuous load current 

 200 mA

Recommended operation: 
Load current < 130 mA
V

OFF

 < 200 V

Buzzer:

4

 

kHz; 87 dB at 12 VDC.

Technical Support 

Grass Valley has made every effort to ensure that the equipment you receive is in perfect working 
order and that the equipment fits your needs. In the event that problems arise that you cannot 
resolve, or if there are any questions regarding this equipment or information about other products 
manufactured by Grass Valley, please contact your local representative or contact Grass Valley 
directly through one of the appropriate means listed here.

• Main telephone: 514-333-1772 Website: http://www.grassvalley.com)

Fax: +1 514-333-9828 
In the Americas, call toll-free: +1-800-547-8949 or +1 530 478 4148 (9 am to 9 pm EST)
In Europe, the Middle East, Africa, or the UK, call  +44 118 952 3444 (9 am to 6 pm, GMT)
For playout automation, call  +44 870 500 4350 (9 am to 5:30 pm, GMT)
In France, call +33 1 55 86 87 88 (9 am to 5 pm, GMT + 1)
In Asia, call +852-2539-6987 (9:30 am to 5 pm, GMT + 8)
In China, call +86-10-5873-1814 (9:30 am to 5 pm, GMT + 8)
In Malaysia, call +60 3 2247 1808

• E-Mail: 

In the Americas, support@grass valley.com
In Europe, the Middle East, Africa, or the UK, eurotech@grass valley.com
For playout automation, automationsupport@grass valley.com
In France, eurotech@grass valley.com
In Asia, asiatech@grass valley.com
In China, asiatech@grass valley.com
In Malaysia, asiatech@grass valley.com

• Mail

Grass Valley
3499 Douglas B. Floreani
Montreal, Quebec
Canada H4S 2C6 

Note

Return Material Authorization (RMA) required for all returns.

Содержание Grass Valley NV9700











Отзывы: