Belden GRASS VALLEY NV9641, Руководство пользователя

Страница: 28 / 111

18
Configuration
Regions of the Configuration Page
Regions of the Configuration Page
Above the ‘Revert to Saved’ and ‘Save’ buttons (always present) there are 5 main regions:
• A graphic representation of the NV9641 panel.
On the left are 16 LCD function buttons. Click on a button to assign a function to it. In
some cases, you can click or double-click certain buttons to execute the button
function. Clicking an up or down button allows you to scroll through selection button
blocks for MD destination assignments. Unless you are configuring a suffix template or
working on a “paging mode” panel configuration, you can double-click a ‘Navigate’
button to make the button’s “subpage” appear.
When you are working on a paging mode configuration, the up and down buttons
select the previous or next pages. (The down button also creates new pages if you
happen to be at the end of the page list.)
Buttons can be illuminated in several colors: green, amber, yellow, red, blue, purple, and
grey. There are 3 levels of illumination: high tally (bright), low tally (muted) and off.
Undefined buttons are turned off (dark) on the actual panel and are gray in the
configuration page.
 Buttons disabled during operation have text, but are dark on the control panel.
On the right are the two scroll buttons. These are not configurable functions. They do
not perform up or down functions in the configuration page except when you are
configuring selection buttons for MD destinations and then only when you have
enabled more than 8 MD destinations.
• Button definitions.
In this section, configurers make button assignments, using its pull-down menus and
text fields. The menus and fields vary with the button type.
See Button Definitions , following.
• Button page table.
This section — the region below the button definition section — displays a list of the
individual pages of the tree structure under the XY/MD model or the list structure
under the paging model. The button page at the top of the table is called “Default.” In
the XY/MD model, it is the root of the tree.
Under the XY/MD model, category buttons can display device subpages when pressed.
Those subpages are
not definable in NV9000-SE Utilities and the button page table
does not display the device subpages accessed through category buttons. Category
buttons can also display suffix pages when pressed. Suffix pages
are included in the
button page table.
Category buttons are not available under the paging model.
See Button Page Table , following.
• GPIO definitions.
In this section, you may define GPIO logic. The control panel has a rear connector that
provides 4 relay outputs and 8 optically isolated inputs. See
GPIO , page 75 , for more
information.
• Panel options.
In this section, you may specify the behavioral characteristics of the panel. See Panel
Options on page 20 .