Belden Grass Valley NV9603, Руководство пользователя, Страница: 52 / 67

42
Operation
Button Illumination
Button Illumination
The last submenu displays the illumination setting:
The buttons at the far left show the illumination level. The upper row shows green and the
lower row shows amber.
The buttons immediately to the left of the display (by convention, ‘Page Up’ and ‘Page
Down’ buttons) increase or decrease the illumination level by 10%. The default level for low
illumination is 40%. The default level for high illumination is 100%.
Press the low illumination button to change the low illumination level. Press the high
illumination button to change the high illumination level.
When you are satisfied with the illumination level you have chosen, press the menu button
once again. At this last step, the panel leaves menu mode and returns to normal mode.

Configurers’ note: it is important not to locate the menu button on any of the buttons
used to change the illumination.
Setup Mode
Setup mode occurs when the NV9603 is disconnected from its network and is freshly
powered up. In setup mode, you can set or change the panel ID, identify the software
version, and perform a test of the panel’s buttons. It is in setup mode that you must initially
set the panel ID.
 It can take several seconds for the buttons to appear.
The panel powers up with 1 button (here called the “setup” button) illuminated in green
and a display of the current panel ID. The panel ID is usually set to 0 at the factory:
Press the setup button to proceed to the first part of setup which is to set the panel ID:
I l l u m H i
1 0 0 %
Up 10%
Down 10%
Menu button, in
these examples
High Illumination
Low Illumination
A C Q I P
0
Setup button
P a n e l I D
0