Belden Grass Valley MCP 450, Руководство пользователя

Страница: 35 / 44

MCP 450 Master Control PC User’s Guide (v1.1) 35
Chapter 3 - Operation
Protect/Unprotect
To prevent a file from being overwritten the location can be protected. This action toggles
between protected and unprotected status.
☞
Note
☞
Note
After a camera software update all scene file locations are empty and the current settings file is
restored to the factory default settings. You can only Store, Load from USB and Rename a
scene file location.
3.6.4 Controlling multiple files
To set up a number of cameras simultaneously select a row of scene file locations at the top of
the matrix. Click or tap one of the locations to open the action menu:
– Recall and Store are carried out for each selected camera individually.
– Save to USB only saves the scene file of the selected camera to the USB Flash Drive.
– Load from USB loads a single scene file from the USB Flash Drive into all scene file
locations.
☞
Note
☞
Note
Be careful when loading a scene file into the current settings: all cameras that are not On Air
will immediately take over the new settings.
– Rename is carried out sequentially for all selected scene files.
– Protect/Unprotected inverts the protection status of all scene files.
Scene file
locations
Multiple file
selection