Belden Grass Valley KMX-3921, Инструкция по установке и обслуживанию

Страница: 14 / 156

14
Overview
Current Limitations
Current Limitations
The KMX-3921 multiviewer supports a subset of the features offered by other Kaleido
Multiviewer series models as shown in the
Kaleido Multiviewer Product Comparison Guide
(see Related Documentation , on page 11).
KMX-3921 Models and Related Hardware
The following components when added to a Densité 3+ FR1 / Densité 3+ FR4 frame creates
a multiviewer.
• KMX-3921 Multiviewer Card(s)
• KMX-3921 Rear Panel
• Optional SFP output Module(s)
Certain optional features must be licensed to make to make the feature available for use.
See
Available Hardware and Software Options , on page 120 for more information.
Densité 3+ FR4 24 CPU-ETH3
-STD
standard
frame
controller
a
Combine up to six KMX-3921 cards, to configure a
dual- or quad-mosaic output system in the
following sizes:
1 card: 9 × 1 and 9 × 2
2 cards: 18 × 2 and 18 × 4
3 cards: 27 × 2 and 27 × 4
4 cards: 36 × 2 and 36 × 4
6 cards: 54 × 2 and 54 × 4
According to the number of KMX-3921 cards chosen
for an installation, a correspondingly sized rear
panel is used to interconnect the cards. Up to four
54 × 4 multiviewers can coexist in this frame for
example.
Densité 3+ FR4 24 CPU-ETH3
-ADV
advanced
frame
controller
a
a. To identify a Densité 3+ FR4 frame’s controller model, see How to Identify a Densité 3+ FR4 Frame’s
Controller Model , on page 22.
Supported Frame
Available

Slots
Frame

Controller

Model Multiviewer Scaling (continued)