GUIDE TO INSTALLATION AND OPERATION
HDA-1941/51 & HDA-3941/51 |
11
standby mode after 30 seconds.
2. If you changed a parameter from the control menu, but have not applied your change (you did not
touch the SEL button on the control panel), once the 30-second timeout has occurred, the parameters
will be confirmed as if you had touched the SEL button
3.4 Remote control using iControl
The operation of the HDA may be controlled using Grass Valley’s iControl system.
•
This manual describes the control panels associated with the HDA and their use.
•
Please consult the iControl User’s Guide for information about setting up and operating iControl.
•
Exception:
At the time of printing, the HDA was not supported by iControl Solo
In iControl Navigator or iControl Websites, double-click on the HDA icon to open the control panel.
3.4.1 The iControl graphic interface window
The basic window structure for the HDA is shown in figure 3.2. The window identification line gives the card type (e.g.
HDA-3951
) and the slot number where the card is installed in its Densité frame.
Figure 3.1 HDA-3951 iControl graphic interface window:
There are three main sections in the window itself, shown in Figure 3.1:
1
2
3
