FX FUSION SC CONNECTOR
PX106500-EN REV E
Page 2 of 8
900µm TIGHT BUFFER/250µm - INSTALLATION GUIDE
NOTE:
Select preprogrammed heat settings and edit the temperature/time as shown.
For additional fusion splicer models and splice holders, refer to document
AEN-1701
available at:
www.belden.com/splice-on
Security precautions:
When installed on a live
system, invisible laser
radiation may be present.
Do not stare into connector
end face or view directly with
optical instruments.
Wear safety glasses when
working with optical fiber.
Dispose of all scrap fiber in the
waste bottle to avoid getting
fiber slivers.
Do not touch cleaver blade.
Materials cleanliness and maintenance:
• Keep the dust cap on and avoid
dust creating activities.
• Maintain the fiber components
clean as your working area.
• Clean end face with alcohol
wipes and then dry wipe as
cleaning procedures.
Instructions for Cleaver:
• If the cleaver does not work
properly rotate the blades
by following the cleaver
manufacturer instructions.
• Clean the cleaver blade with
alcohol wipes.
= This symbol indicates risks and hazards that may cause eye injuries.
= This symbol indicates the presence of a risk that can cause personal injuries or components damages.
Fusion Splicer Heat Settings
Prepro-
grammed
heat setting
Splice
Holder Part
Number
Model
Temp.
Time
Belden FXFSTOSPL
180°C
30 sec.
FX SC Fusion
FXFSSHFM2
Sumitomo Q101-CA
180°C
30 sec.
60mm 0.9
FXFSSHFM1
AFL/Fujikura 70S
180°C
25 sec.
60mms/FP
-
03
AFL/Fujikura 62S
180°C
40 sec.
60mms/FP
-
03
Fiber Fox Mini 6S
180°C
30 sec.
Long
Greenlee 910FS
180°C
40 sec.
60mm
FXFSSHFM3
Fitel S178A
180°C
40 sec.
SOC
FXFSSHFM4
