DCX XCONNECT CABINET: SYSTEM
PX106864 - EN REV A
Page 44 of 48
INSTALLATION GUIDE
10.2. In-Cabinet Patch Cord Bridge installation - optional
To proceed with the installation of this accessory, the In-Cabinet Channel (
DCX-HINC-KIT01/02x
) must be installed into a DCX Cabinet first.
1
.
Align the pins of both Patch Cord accessories and make a slight push for grouping them together (and create the Patch Cord
Bridge Assembly).
2
.
Place the Patch Cord Bridge Assembly between two In-Cabinet Channels at the patch cord management area.
Insert the plastic screws provided (4 per side) to secure the Patch Cord Bridge from both sides (Front and Rear).
