Belden 942999831, Руководство пользователя

Страница: 42 / 79

42
Installation MTS2600/2700/2800
Release 01 12/2021
Note: When the device is operated in an environment with continuous
vibration load greater than 0.7 g, it must be fixed to the switch cabinet with the
2 fixed mounting brackets at the front and rear of the device.
Additional mounting brackets are provided as accessories.
See “Accessories” on the page 75.
Prerequisites:

Install the device in a 19" switch cabinet by means of the slide or mounting
rails. It improves the stability of the device in an environment affected by
vibrations. For more information about the slide or mounting rails and how
to install them, please contact the switch cabinet manufacturer.

The device is designed to be installed in a 19" switch cabinet. At the time of
delivery, 2 preinstalled fixed mounting brackets come with the device on the
side.

Make sure the device is well ventilated. If necessary, install a fan to help
prevent overheating.

Measure the depth of the 19" cabinet for easy connection.
Perform the following work steps:

Install the sliding or mounting rails in a 19" switch cabinet as specified by
the manufacturer.

Wear an ESD wrist strap and check the grounding and stability of the
cabinet

Install the floating nuts in the marked positions. See Figure 23 .
Figure 23: Installing the floating nuts

Place the device on the rail in the switch cabinet.

Attach the mounting bracket to the switch cabinet using screws that meet
the cabinet installation requirements (the screws are provided by the
cabinet manufacturer and are rust proof on their surfaces). Ensure that the
screws are in horizontal position. See Figure 24 .